Lauri Carving 84 Stainless Steel Blade

Lauri Carving 84 Stainless; (84x17/15x3.25mm), has a slight taper, which I think makes the blade a bit more graceful. The blade is about 3 5/16" long, 5/8" wide at the base, and.130" thick. The tang is about 4 3/8" long.

Blade Material: X50CrMoV15 Stainless Steel - heat treated, sharpened & ready to use

Best Bolsters/Ferrules Below 

Link to 15x22x3 Shaped - Smallest possible bolster to fit this blade

Link to 16x24x3 Shaped - Average sized Bolster

Link to 15x23x13 Shaped Ferrule - For those that like Ferrules

Link to 18x28x3 Shaped - Very Popular for this blade

Link to 19x30x3 Shaped - Most common, Can be ground down to a decent sized finger guard

Link to 18x35x3 Shaped - Best for those that like a long distinct finger guard