Lauri Carving 80 Carbon Steel Blade With Ricasso

Lauri Carving 80 with Ricasso; (80x23/16x3.25mm), I think the taper of this blade is particularly attractive. When used with a light weight handle it also puts a greater percentage of the mass near the center of gravity. This makes for a knife that balances well and feels lively in the hand. The blade is about 3 1/4" long, 7/8" wide at the base, and.130" thick. The tang is about 4 7/8" long. 

Blade Material: 80CrV2 High Carbon Steel– heat treated, sharpened & ready to use

Best paired fittings below

Link to 16x24x3 Straight Bolster - Smallest bolster that we suggest for this blade

Link to 15x23x13 Straight ferrule - Only Ferrule that can be used for this blade

Link to 18x28x3 Straight Bolster - Average size for this blade

Link to 19x30x3 Straight Bolster - Most common bolster for this blade

Link to 18x35x3 Straight Short Slot Bolster - For those that like a pronounced finger guard